View 2SC3314_282142.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SC3314
Silicon NPN epitaxial planer type
For high-frequency amplification Complementary to 2SA1323
Unit: mm
4.00.2 2.00.2
s Features
q q q q
(0.8) 3.00.2
Optimum for high-density mounting. Allowing supply with the radial taping. Optimum for RF amplification of FM/AM radios. High transition frequency fT.
s Absolute Maximum Ratings
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg
(Ta=25C)
Ratings 30 20 5 30 300 150 -55 ~ +150 Unit V V
0.45+0.20 -0.10 (2.5) (2.5) 0.45+0.20 -0.10 0.70.1
1
15.60.5
2
3
V mA mW C C
1:Emitter 2:Collector 3:Base
(0.8)
0.75 max.
7.6
NS-B1 Package
s Electrical Characteristics
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Base to emitter voltage Transition frequency Noise figure Common emitter reverse transfer capacitance Reverse transfer impedance
(Ta=25C)
Symbol VCBO VCEO VEBO hFE
*
Conditions IC = 10A, IE = 0 IC = 1mA, IB = 0 IE = 10A, IC = 0 VCE = 10V, IC = 1mA IC = 10mA, IB = 1mA VCE = 10V, IC = 1mA VCB = 10V, IE = -1mA, f = 200MHz VCB = 10V, IE = -1mA, f = 5MHz VCE = 10V, IC = 1mA, f = 10.7MHz VCB = 10V, IE = -1mA, f = 2MHz
min 30 20 5 70
typ
max
Unit V V V
220 0.1 0.7 V V MHz 4.0 1.5 50 dB pF
VCE(sat) VBE fT NF Cre Zrb
150
300 2.8
*h
FE
Rank classification
B 70 ~ 140 C 110 ~ 220 hFE
Rank
393
Transistor
PC -- Ta
500 240 Ta=25C 200 50
2SC3314
IC -- VCE
60 VCE=10V
IC -- VBE
Collector power dissipation PC (mW)
Collector current IC (mA)
Collector current IC (mA)
400
160 IB=100A 80A 80 60A 40A 40 20A
40 Ta=75C 30
25C
300
-25C
120
200
20
100
10
0 0 20 40 60 80 100 120 140 160
0 0 2 4 6 8 10 12
0 0 0.4 0.8 1.2 1.6 2.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
VCE(sat) -- IC
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 Ta=75C 0.3 0.1 0.03 0.01 0.1 25C -25C IC/IB=10 240
hFE -- IC
800 VCE=10V
fT -- I E
Ta=25C
Forward current transfer ratio hFE
200
Transition frequency fT (MHz)
700 600 500 400 300 200 100 VCE=10V 6V
160
Ta=75C 25C
120 -25C 80
40
0.3
1
3
10
30
100
0 0.1
0.3
1
3
10
30
100
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
Collector current IC (mA)
Collector current IC (mA)
Emitter current IE (mA)
Zrb -- IE
Reverse transfer impedance Zrb ()
VCB=10V f=2MHz Ta=25C
Cre -- VCE
Common emitter reverse transfer capacitance Cre (pF)
3.0 f=10.7MHz Ta=25C 2.5 20 24 VCE=10V f=100MHz Ta=25C
PG -- IE
60
50
40
2.0 1mA 1.5 IC=3mA
Power gain PG (dB)
10 30 100
16
30
12
20
1.0
8
10
0.5
4
0 - 0.1
- 0.3
-1
-3
-10
0 0.1
0.3
1
3
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
Emitter current IE (mA)
Collector to emitter voltage VCE (V)
Emitter current IE (mA)
394
Transistor
NF -- IE
12 5
2SC3314
Cob -- VCB
Collector output capacitance Cob (pF)
VCB=6V f=100MHz Rg=50 Ta=25C IE=0 f=1MHz Ta=25C 4
10
Noise figure NF (dB)
8
3
6
2
4
2
1
0 - 0.1
0 - 0.3 -1 -3 -10 1 3 10 30 100
Emitter current IE (mA)
Collector to base voltage VCB (V)
395
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC3314

	To Download 2SC3314 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .